Parent Directory
| 
Revision Log
| Links to HEAD: | (view) (download) (annotate) |
| Sticky Revision: |
Remove frontstuff Nothing implements this in the tree. Remove the ioctl and the conversion to the geom atttribute stuff. This was introduced in r94287 in 2002 and was retired in r113390 2003. It appeared in FreeBSD 5.0, but no other releases. This is a vestige that was missed at the time and overlooked until now. No compat is provided for this reason. And there's no implementation of it today. And it was never part of a release from a stable branch. Reviewed by: phk@ Differential Revision: https://reviews.freebsd.org/D26967
geom: clean up empty lines in .c and .h files
Use devctl.h instead of bus.h to reduce newbus pollution. There's no need for these parts of the kernel to know about newbus, so narrow what is included to devctl.h for device_notify_*. Suggested by: kib@
Reimplement aliases in geom The alias needs to be part of the provider instead of the geom to work properly. To bind the DEV geom, we need to look at the provider's names and aliases and create the dev entries from there. If this lives in the GEOM, then it won't propigate down the tree properly. Remove it from geom, add it provider. Update geli, gmountver, gnop, gpart, and guzip to use it, which handles the bulk of the uses in FreeBSD. I think this is all the providers that create a new name based on their parent's name.
Now that we don't have special-case geom hacking defined in md_var.h, stop including it. sparc64 was the last straggler here, but these weren't removed at the time.
Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many) r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are still not MPSAFE (or already are but aren’t properly marked). Use it in preparation for a general review of all nodes. This is non-functional change that adds annotations to SYSCTL_NODE and SYSCTL_PROC nodes using one of the soon-to-be-required flags. Mark all obvious cases as MPSAFE. All entries that haven't been marked as MPSAFE before are by default marked as NEEDGIANT Approved by: kib (mentor, blanket) Commented by: kib, gallatin, melifaro Differential Revision: https://reviews.freebsd.org/D23718
The error variable is not really needed. Remove it.
Pass BIO_SPEEDUP through all the geom layers While some geom layers pass unknown commands down, not all do. For the ones that don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as applicable. No changes to vinum or virstor because I was unsure how to add this support, and I'm also unsure how to test these. gvinum doesn't implement BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing and not supportig BIO_SPEEDUP is fine. Reviewed by: chs Differential Revision: https://reviews.freebsd.org/D23183
Avoid few memory accesses in g_disk_done().
Use atomic for start_count in devstat_start_transaction(). Combined with earlier nstart/nend removal it allows to remove several locks from request path of GEOM and few other places. It would be cool if we had more SMP-friendly statistics, but this helps too. Sponsored by: iXsystems, Inc.
Remove some branching from GEOM_DISK hot path. pp->private just can not be NULL in those places. In g_disk_start() and g_disk_ioctl() both dp != NULL and !dp->d_destroyed should always be true if disk_gone() and disk_destroy() are used properly, since GEOM does not send requests to errored providers. If the protocol is not followed, then no amount of additional checks here give real safety. In g_disk_access() though the checks are useful, since GEOM blocks only new opens for errored providers, but allows closes. It should not happen if disk_gone() and disk_destroy() are used properly, but may otherwise. To improve cases when disk_gone() is not used, call it from disk_destroy(). It does not give full guaranties, but it errors the provider and makes GEOM block unwanted requests at least after some race. MFC after: 2 weeks
Add GEOM attribute to report physical device name, and report it via 'diskinfo -v'. This avoids the need to track it down via CAM, and should also work for disks that don't use CAM. And since it's inherited thru the GEOM hierarchy, in most cases one doesn't need to walk the GEOM graph either, eg you can use it on a partition instead of disk itself. Reviewed by: allanjude, imp Sponsored by: Klara Inc Differential Revision: https://reviews.freebsd.org/D22249
Use sbuf_cat() in GEOM confxml generation. When it comes to megabytes of text, difference between sbuf_printf() and sbuf_cat() becomes substantial. MFC after: 2 weeks Sponsored by: iXsystems, Inc.
geom_disk / scsi_da: deny opening write-protected disks for writing Ths change consists of two parts. geom_disk: deny opening a disk for writing if it's marked as write-protected. A new disk(9) flag is added to mark write protected disks. A possible alternative could be to add another parameter to d_open, so that the open mode could be passed to it and the disk drivers could make the decision internally, but the flag required less churn. scsi_da: add a new phase of disk probing to query the all pages mode sense page. We can determine if the disk is write protected using bit 7 of the device specific field in the mode parameter header returned by MODE SENSE. PR: 224037 Reviewed by: mav MFC after: 4 weeks Differential Revision: https://reviews.freebsd.org/D13360
sys/geom: adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
Expose API to allow disks to ask for alias names in devfs. Implement disk_add_alias to allow aliases to be added to disks. All disk have a primary name (say "foo") can also have secondary names (say "bar") such that all instances of "foo" also have a "bar" alias. So if you have foo0, foo0p1, foo1, foo1s1 and foo1s1a nodes created by the foo driver and gpart, device nodes bar0, bar0p1, bar1, bar1s1 and bar1s1a will appear as symlinks back to the original nodes. This generalizes to multiple aliases. However, since the unit number follows the primary name, multiple device drivers can't create the same aliases unless those drives coorinate the unit number space (eg you couldn't add an alias 'disk' to both 'da' and 'ada' because it's possible to have da0 and ada0, because 'disk0' is ambiguous). Differential Revision: https://reviews.freebsd.org/D11873
Add GEOM::descr attribute for symmetry with GEOM::ident. MFC after: 2 weeks
Report disk flags via the sysctl tree
Report random flash storage as non-rotating to GEOM_DISK. While doing it, introduce respective constants in geom_disk.h. MFC after: 1 week
Add BUF_TRACKING and FULL_BUF_TRACKING buffer debugging Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code. This can be handy in tracking down what code touched hung bios and bufs last. The full history is especially useful, but adds enough bloat that it shouldn't be enabled in release builds. Function names (or arbitrary string constants) are tracked in a fixed-size ring in bufs. Bios gain a pointer to the upper buf for tracking. SCSI CCBs gain a pointer to the upper bio for tracking. Reviewed by: markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D8366
Do not invoke resize event if initial disk size is zero. Some disks report the size only after first opening. And due to the events are asynchronous, some consumers can receive this event too late and this confuses them. This partially restores previous behaviour, and at the same time this should fix the problem, when already opened provider loses resize event. PR: 211028 MFC after: 3 weeks
Use g_resize_provider() to change the size of GEOM_DISK provider, when it is being opened. This should fix the possible loss of a resize event when disk capacity changed. PR: 211028 Reported by: Dexuan Cui <decui at microsoft dot com> MFC after: 3 weeks
Switch geom_disk over to using a pool mutex. The GEOM disk d_mtx is only acquired on disk creation and destruction. It is a good candidate for replacement with a pool mutex. This eliminates the mutex initialization and teardown and the mutex and name variables themselves from struct disk. sys/geom/geom_disk.h: Take d_mtx and d_mtx_name out of struct disk. sys/geom/geom_disk.c: Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk initialization state instead of a dedicated mutex. This allows removing the initialization and destruction of d_mtx. sys/sys/param.h: Bump __FreeBSD_version to 1100119 for the change to struct disk. Suggested by: jhb Sponsored by: Spectra Logic Approved by: re (gjb)
Fix a bug that caused da(4) instances to hang around after the underlying device is gone. The problem was that when disk_gone() is called, if the GEOM disk creation process has not yet happened, the withering process couldn't start. We didn't record any state in the GEOM disk code, and so the d_gone() callback to the da(4) driver never happened. The solution is to track the state of the creation process, and initiate the withering process from g_disk_create() if the disk is being created. This change does add fields to struct disk, and so I have bumped DISK_VERSION. geom_disk.c: Track where we are in the disk creation process, and check to see whether our underlying disk has gone away or not. In disk_gone(), set a new d_goneflag variable that g_disk_create() can check to see if it needs to clean up the disk instance. geom_disk.h: Add a mutex to struct disk (for internal use) disk init level, and a gone flag. Bump DISK_VERSION because the size of struct disk has changed and fields have been added at the beginning. Sponsored by: Spectra Logic Approved by: re (marius)
Add support for managing Shingled Magnetic Recording (SMR) drives. This change includes support for SCSI SMR drives (which conform to the Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to the Zoned ATA Command Set or ZAC spec) behind SAS expanders. This includes full management support through the GEOM BIO interface, and through a new userland utility, zonectl(8), and through camcontrol(8). This is now ready for filesystems to use to detect and manage zoned drives. (There is no work in progress that I know of to use this for ZFS or UFS, if anyone is interested, let me know and I may have some suggestions.) Also, improve ATA command passthrough and dispatch support, both via ATA and ATA passthrough over SCSI. Also, add support to camcontrol(8) for the ATA Extended Power Conditions feature set. You can now manage ATA device power states, and set various idle time thresholds for a drive to enter lower power states. Note that this change cannot be MFCed in full, because it depends on changes to the struct bio API that break compatilibity. In order to avoid breaking the stable API, only changes that don't touch or depend on the struct bio changes can be merged. For example, the camcontrol(8) changes don't depend on the new bio API, but zonectl(8) and the probe changes to the da(4) and ada(4) drivers do depend on it. Also note that the SMR changes have not yet been tested with an actual SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT layer, so any testing help would be appreciated. These changes have been tested with Seagate Host Aware SATA drives attached to both SAS and SATA controllers. Also, I do not have any SATA Host Managed devices, and I suspect that it may take additional (hopefully minor) changes to support them. Thanks to Seagate for supplying the test hardware and answering questions. sbin/camcontrol/Makefile: Add epc.c and zone.c. sbin/camcontrol/camcontrol.8: Document the zone and epc subcommands. sbin/camcontrol/camcontrol.c: Add the zone and epc subcommands. Add auxiliary register support to build_ata_cmd(). Make sure to set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA flags as appropriate for ATA commands. Add a new get_ata_status() function to parse ATA result from SCSI sense descriptors (for ATA passthrough over SCSI) and ATA I/O requests. sbin/camcontrol/camcontrol.h: Update the build_ata_cmd() prototype Add get_ata_status(), zone(), and epc(). sbin/camcontrol/epc.c: Support for ATA Extended Power Conditions features. This includes support for all features documented in the ACS-4 Revision 12 specification from t13.org (dated February 18, 2016). The EPC feature set allows putting a drive into a power power mode immediately, or setting timeouts so that the drive will automatically enter progressively lower power states after various idle times. sbin/camcontrol/fwdownload.c: Update the firmware download code for the new build_ata_cmd() arguments. sbin/camcontrol/zone.c: Implement support for Shingled Magnetic Recording (SMR) drives via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA Command Set (ZAC). These specs were developed in concert, and are functionally identical. The primary differences are due to SCSI and ATA differences. (SCSI is big endian, ATA is little endian, for example.) This includes support for all commands defined in the ZBC and ZAC specs. sys/cam/ata/ata_all.c: Decode a number of additional ATA command names in ata_op_string(). Add a new CCB building function, ata_read_log(). Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building functions. These support both DMA and NCQ encapsulation. sys/cam/ata/ata_all.h: Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and ata_zac_mgmt_in(). sys/cam/ata/ata_da.c: Revamp the ada(4) driver to support zoned devices. Add four new probe states to gather information needed for zone support. Add a new adasetflags() function to avoid duplication of large blocks of flag setting between the async handler and register functions. Add new sysctl variables that describe zone support and paramters. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. sys/cam/scsi/scsi_all.c: Add command descriptions for the ZBC IN/OUT commands. Add descriptions for ZBC Host Managed devices. Add a new function, scsi_ata_pass() to do ATA passthrough over SCSI. This will eventually replace scsi_ata_pass_16() -- it can create the 12, 16, and 32-byte variants of the ATA PASS-THROUGH command, and supports setting all of the registers defined as of SAT-4, Revision 5 (March 11, 2016). Change scsi_ata_identify() to use scsi_ata_pass() instead of scsi_ata_pass_16(). Add a new scsi_ata_read_log() function to facilitate reading ATA logs via SCSI. sys/cam/scsi/scsi_all.h: Add the new ATA PASS-THROUGH(32) command CDB. Add extended and variable CDB opcodes. Add Zoned Block Device Characteristics VPD page. Add ATA Return SCSI sense descriptor. Add prototypes for scsi_ata_read_log() and scsi_ata_pass(). sys/cam/scsi/scsi_da.c: Revamp the da(4) driver to support zoned devices. Add five new probe states, four of which are needed for ATA devices. Add five new sysctl variables that describe zone support and parameters. The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC devices when they are attached via a SCSI to ATA Translation (SAT) layer. Since ZBC -> ZAC translation is a new feature in the T10 SAT-4 spec, most SATA drives will be supported via ATA commands sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will prefer the ZBC interface, if it is available, for performance reasons, but will use the ATA PASS-THROUGH interface to the ZAC command set if the SAT layer doesn't support translation yet. As I mentioned above, ZBC command support is untested. Add support for the new BIO_ZONE bio, and all of its subcommands: DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP, DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS. Add scsi_zbc_in() and scsi_zbc_out() CCB building functions. Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB building functions. Note that these have return values, unlike almost all other CCB building functions in CAM. The reason is that they can fail, depending upon the particular combination of input parameters. The primary failure case is if the user wants NCQ, but fails to specify additional CDB storage. NCQ requires using the 32-byte version of the SCSI ATA PASS-THROUGH command, and the current CAM CDB size is 16 bytes. sys/cam/scsi/scsi_da.h: Add ZBC IN and ZBC OUT CDBs and opcodes. Add SCSI Report Zones data structures. Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and scsi_ata_zac_mgmt_in() prototypes. sys/dev/ahci/ahci.c: Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver. ahci_setup_fis() previously set the top bits of the sector count register in the FIS to 0 for FPDMA commands. This is okay for read and write, because the PRIO field is in the only thing in those bits, and we don't implement that further up the stack. But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that byte, so it needs to be transmitted to the drive. In ahci_setup_fis(), always set the the top 8 bits of the sector count register. We need it in both the standard and NCQ / FPDMA cases. sys/geom/eli/g_eli.c: Pass BIO_ZONE commands through the GELI class. sys/geom/geom.h: Add g_io_zonecmd() prototype. sys/geom/geom_dev.c: Add new DIOCZONECMD ioctl, which allows sending zone commands to disks. sys/geom/geom_disk.c: Add support for BIO_ZONE commands. sys/geom/geom_disk.h: Add a new flag, DISKFLAG_CANZONE, that indicates that a given GEOM disk client can handle BIO_ZONE commands. sys/geom/geom_io.c: Add a new function, g_io_zonecmd(), that handles execution of BIO_ZONE commands. Add permissions check for BIO_ZONE commands. Add command decoding for BIO_ZONE commands. sys/geom/geom_subr.c: Add DDB command decoding for BIO_ZONE commands. sys/kern/subr_devstat.c: Record statistics for REPORT ZONES commands. Note that the number of bytes transferred for REPORT ZONES won't quite match what is received from the harware. This is because we're necessarily counting bytes coming from the da(4) / ada(4) drivers, which are using the disk_zone.h interface to communicate up the stack. The structure sizes it uses are slightly different than the SCSI and ATA structure sizes. sys/sys/ata.h: Add many bit and structure definitions for ZAC, NCQ, and EPC command support. sys/sys/bio.h: Convert the bio_cmd field to a straight enumeration. This will yield more space for additional commands in the future. After change r297955 and other related changes, this is now possible. Converting to an enumeration will also prevent use as a bitmask in the future. sys/sys/disk.h: Define the DIOCZONECMD ioctl. sys/sys/disk_zone.h: Add a new API for managing zoned disks. This is very close to the SCSI ZBC and ATA ZAC standards, but uses integers in native byte order instead of big endian (SCSI) or little endian (ATA) byte arrays. This is intended to offer to the complete feature set of the ZBC and ZAC disk management without requiring the application developer to include SCSI or ATA headers. We also use one set of headers for ioctl consumers and kernel bio-level consumers. sys/sys/param.h: Bump __FreeBSD_version for sys/bio.h command changes, and inclusion of SMR support. usr.sbin/Makefile: Add the zonectl utility. usr.sbin/diskinfo/diskinfo.c Add disk zoning capability to the 'diskinfo -v' output. usr.sbin/zonectl/Makefile: Add zonectl makefile. usr.sbin/zonectl/zonectl.8 zonectl(8) man page. usr.sbin/zonectl/zonectl.c The zonectl(8) utility. This allows managing SCSI or ATA zoned disks via the disk_zone.h API. You can report zones, reset write pointers, get parameters, etc. Sponsored by: Spectra Logic Differential Revision: https://reviews.freebsd.org/D6147 Reviewed by: wblock (documentation)
sys/geom: spelling fixes in comments. No functional change.
DRY on buffer sizes. Update to r298420. sys/geom/geom_disk.c: In disk_attr_changed, don't repeat a buffer size. Reported by: ngie, hselasky MFC after: 4 weeks X-MFC-With: 298420 Sponsored by: Spectra Logic Corp
Notify userspace listeners when geom disk attributes have changed sys/geom/geom_disk.c: disk_attr_changed(): Generate a devctl event of type GEOM:<attr> for every call. MFC after: 4 weeks Sponsored by: Spectra Logic Corp Differential Revision: https://reviews.freebsd.org/D5952
Don't assume that bio_cmd is bit mask. Differential Revision: https://reviews.freebsd.org/D5593
Add rotationrate to geom disk dumpconf Parse and report the nominal rotation rate reported by the drive. Reviewed by: sbruno, jhb Approved by: jhb MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D4483 Requested by: Kevin Bowling < kevin.bowling @ kev009.com >
Fix a style issue in g_disk_limit(). Noticed by: bdrewery MFC after: 1 week
Fix g_disk_vlist_limit() to work properly with deletes. Add a new bp argument to g_disk_maxsegs(), and add a new function, g_disk_maxsize() tha will properly determine the maximum I/O size for a delete or non-delete bio. Submitted by: will MFC after: 1 week Sponsored by: Spectra Logic
Add asynchronous command support to the pass(4) driver, and the new
camdd(8) utility.
CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and
completed CCBs may be retrieved via the CAMIOGET ioctl. User
processes can use poll(2) or kevent(2) to get notification when
I/O has completed.
While the existing CAMIOCOMMAND blocking ioctl interface only
supports user virtual data pointers in a CCB (generally only
one per CCB), the new CAMIOQUEUE ioctl supports user virtual and
physical address pointers, as well as user virtual and physical
scatter/gather lists. This allows user applications to have more
flexibility in their data handling operations.
Kernel memory for data transferred via the queued interface is
allocated from the zone allocator in MAXPHYS sized chunks, and user
data is copied in and out. This is likely faster than the
vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in
configurations with many processors (there are more TLB shootdowns
caused by the mapping/unmapping operation) but may not be as fast
as running with unmapped I/O.
The new memory handling model for user requests also allows
applications to send CCBs with request sizes that are larger than
MAXPHYS. The pass(4) driver now limits queued requests to the I/O
size listed by the SIM driver in the maxio field in the Path
Inquiry (XPT_PATH_INQ) CCB.
There are some things things would be good to add:
1. Come up with a way to do unmapped I/O on multiple buffers.
Currently the unmapped I/O interface operates on a struct bio,
which includes only one address and length. It would be nice
to be able to send an unmapped scatter/gather list down to
busdma. This would allow eliminating the copy we currently do
for data.
2. Add an ioctl to list currently outstanding CCBs in the various
queues.
3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do
that.
4. Test physical address support. Virtual pointers and scatter
gather lists have been tested, but I have not yet tested
physical addresses or scatter/gather lists.
5. Investigate multiple queue support. At the moment there is one
queue of commands per pass(4) device. If multiple processes
open the device, they will submit I/O into the same queue and
get events for the same completions. This is probably the right
model for most applications, but it is something that could be
changed later on.
Also, add a new utility, camdd(8) that uses the asynchronous pass(4)
driver interface.
This utility is intended to be a basic data transfer/copy utility,
a simple benchmark utility, and an example of how to use the
asynchronous pass(4) interface.
It can copy data to and from pass(4) devices using any target queue
depth, starting offset and blocksize for the input and ouptut devices.
It currently only supports SCSI devices, but could be easily extended
to support ATA devices.
It can also copy data to and from regular files, block devices, tape
devices, pipes, stdin, and stdout. It does not support queueing
multiple commands to any of those targets, since it uses the standard
read(2)/write(2)/writev(2)/readv(2) system calls.
The I/O is done by two threads, one for the reader and one for the
writer. The reader thread sends completed read requests to the
writer thread in strictly sequential order, even if they complete
out of order. That could be modified later on for random I/O patterns
or slightly out of order I/O.
camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from
the pass(4) driver and also to send request notifications internally.
For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR)
per CAM CCB on the reading side, and a scatter/gather list
(CAM_DATA_SG) on the writing side. In addition to testing both
interfaces, this makes any potential reblocking of I/O easier. No
data is copied between the reader and the writer, but rather the
reader's buffers are split into multiple I/O requests or combined
into a single I/O request depending on the input and output blocksize.
For the file I/O path, camdd(8) also uses a single buffer (read(2),
write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list
(readv(2), writev(2), preadv(2), pwritev(2)) on writes.
Things that would be nice to do for camdd(8) eventually:
1. Add support for I/O pattern generation. Patterns like all
zeros, all ones, LBA-based patterns, random patterns, etc. Right
Now you can always use /dev/zero, /dev/random, etc.
2. Add support for a "sink" mode, so we do only reads with no
writes. Right now, you can use /dev/null.
3. Add support for automatic queue depth probing, so that we can
figure out the right queue depth on the input and output side
for maximum throughput. At the moment it defaults to 6.
4. Add support for SATA device passthrough I/O.
5. Add support for random LBAs and/or lengths on the input and
output sides.
6. Track average per-I/O latency and busy time. The busy time
and latency could also feed in to the automatic queue depth
determination.
sys/cam/scsi/scsi_pass.h:
Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue
and fetch asynchronous CAM CCBs respectively.
Although these ioctls do not have a declared argument, they
both take a union ccb pointer. If we declare a size here,
the ioctl code in sys/kern/sys_generic.c will malloc and free
a buffer for either the CCB or the CCB pointer (depending on
how it is declared). Since we have to keep a copy of the
CCB (which is fairly large) anyway, having the ioctl malloc
and free a CCB for each call is wasteful.
sys/cam/scsi/scsi_pass.c:
Add asynchronous CCB support.
Add two new ioctls, CAMIOQUEUE and CAMIOGET.
CAMIOQUEUE adds a CCB to the incoming queue. The CCB is
executed immediately (and moved to the active queue) if it
is an immediate CCB, but otherwise it will be executed
in passstart() when a CCB is available from the transport layer.
When CCBs are completed (because they are immediate or
passdone() if they are queued), they are put on the done
queue.
If we get the final close on the device before all pending
I/O is complete, all active I/O is moved to the abandoned
queue and we increment the peripheral reference count so
that the peripheral driver instance doesn't go away before
all pending I/O is done.
The new passcreatezone() function is called on the first
call to the CAMIOQUEUE ioctl on a given device to allocate
the UMA zones for I/O requests and S/G list buffers. This
may be good to move off to a taskqueue at some point.
The new passmemsetup() function allocates memory and
scatter/gather lists to hold the user's data, and copies
in any data that needs to be written. For virtual pointers
(CAM_DATA_VADDR), the kernel buffer is malloced from the
new pass(4) driver malloc bucket. For virtual
scatter/gather lists (CAM_DATA_SG), buffers are allocated
from a new per-pass(9) UMA zone in MAXPHYS-sized chunks.
Physical pointers are passed in unchanged. We have support
for up to 16 scatter/gather segments (for the user and
kernel S/G lists) in the default struct pass_io_req, so
requests with longer S/G lists require an extra kernel malloc.
The new passcopysglist() function copies a user scatter/gather
list to a kernel scatter/gather list. The number of elements
in each list may be different, but (obviously) the amount of data
stored has to be identical.
The new passmemdone() function copies data out for the
CAM_DATA_VADDR and CAM_DATA_SG cases.
The new passiocleanup() function restores data pointers in
user CCBs and frees memory.
Add new functions to support kqueue(2)/kevent(2):
passreadfilt() tells kevent whether or not the done
queue is empty.
passkqfilter() adds a knote to our list.
passreadfiltdetach() removes a knote from our list.
Add a new function, passpoll(), for poll(2)/select(2)
to use.
Add devstat(9) support for the queued CCB path.
sys/cam/ata/ata_da.c:
Add support for the BIO_VLIST bio type.
sys/cam/cam_ccb.h:
Add a new enumeration for the xflags field in the CCB header.
(This doesn't change the CCB header, just adds an enumeration to
use.)
sys/cam/cam_xpt.c:
Add a new function, xpt_setup_ccb_flags(), that allows specifying
CCB flags.
sys/cam/cam_xpt.h:
Add a prototype for xpt_setup_ccb_flags().
sys/cam/scsi/scsi_da.c:
Add support for BIO_VLIST.
sys/dev/md/md.c:
Add BIO_VLIST support to md(4).
sys/geom/geom_disk.c:
Add BIO_VLIST support to the GEOM disk class. Re-factor the I/O size
limiting code in g_disk_start() a bit.
sys/kern/subr_bus_dma.c:
Change _bus_dmamap_load_vlist() to take a starting offset and
length.
Add a new function, _bus_dmamap_load_pages(), that will load a list
of physical pages starting at an offset.
Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios.
Allow unmapped I/O to start at an offset.
sys/kern/subr_uio.c:
Add two new functions, physcopyin_vlist() and physcopyout_vlist().
sys/pc98/include/bus.h:
Guard kernel-only parts of the pc98 machine/bus.h header with
#ifdef _KERNEL.
This allows userland programs to include <machine/bus.h> to get the
definition of bus_addr_t and bus_size_t.
sys/sys/bio.h:
Add a new bio flag, BIO_VLIST.
sys/sys/uio.h:
Add prototypes for physcopyin_vlist() and physcopyout_vlist().
share/man/man4/pass.4:
Document the CAMIOQUEUE and CAMIOGET ioctls.
usr.sbin/Makefile:
Add camdd.
usr.sbin/camdd/Makefile:
Add a makefile for camdd(8).
usr.sbin/camdd/camdd.8:
Man page for camdd(8).
usr.sbin/camdd/camdd.c:
The new camdd(8) utility.
Sponsored by: Spectra Logic
MFC after: 1 week
Revert somewhat hackish geom_disk optimization, committed as part of r256880, and the following r273143 commit, supposed to workaround introduced issue by quite innocent-looking change. While there is no clear understanding why, but r273143 is accused in data corruption in some environments with high I/O load. I personally don't see any problem in that commit, and possibly it is just a trigger to some other bug somewhere, but better safe then sorry for now. Requested by: scottl@ MFC after: 3 days
Pull in r267961 and r267973 again. Fix for issues reported will follow.
Revert r267961, r267973: These changes prevent sysctl(8) from returning proper output, such as: 1) no output from sysctl(8) 2) erroneously returning ENOMEM with tools like truss(1) or uname(1) truss: can not get etype: Cannot allocate memory
Extend the meaning of the CTLFLAG_TUN flag to automatically check if there is an environment variable which shall initialize the SYSCTL during early boot. This works for all SYSCTL types both statically and dynamically created ones, except for the SYSCTL NODE type and SYSCTLs which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to be used in the case a tunable sysctl has a custom initialisation function allowing the sysctl to still be marked as a tunable. The kernel SYSCTL API is mostly the same, with a few exceptions for some special operations like iterating childrens of a static/extern SYSCTL node. This operation should probably be made into a factored out common macro, hence some device drivers use this. The reason for changing the SYSCTL API was the need for a SYSCTL parent OID pointer and not only the SYSCTL parent OID list pointer in order to quickly generate the sysctl path. The motivation behind this patch is to avoid parameter loading cludges inside the OFED driver subsystem. Instead of adding special code to the OFED driver subsystem to post-load tunables into dynamically created sysctls, we generalize this in the kernel. Other changes: - Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask" to "hw.pcic.intr_mask". - Removed redundant TUNABLE statements throughout the kernel. - Some minor code rewrites in connection to removing not needed TUNABLE statements. - Added a missing SYSCTL_DECL(). - Wrapped two very long lines. - Avoid malloc()/free() inside sysctl string handling, in case it is called to initialize a sysctl from a tunable, hence malloc()/free() is not ready when sysctls from the sysctl dataset are registered. - Bumped FreeBSD version to indicate SYSCTL API change. MFC after: 2 weeks Sponsored by: Mellanox Technologies
Make GEOM DISK to account also BIO_FLUSH operations.
Remove redundant include MFC after: 3 days
Fix spelling error in g_trace() call. Sponsored by: EMC / Isilon Storage Division MFC after: 1 week
Escape special XML chars, returned by some devices, confusing XML parsers. MFC after: 1 month
Reject attempts to attack a disk device that has the old NEEDSGIANT flag set. Reviewed by: mav
Improve ZFS N-way mirror read performance by using load and locality information. The existing algorithm selects a preferred leaf vdev based on offset of the zio request modulo the number of members in the mirror. It assumes the devices are of equal performance and that spreading the requests randomly over both drives will be sufficient to saturate them. In practice this results in the leaf vdevs being under utilized. The new algorithm takes into the following additional factors: * Load of the vdevs (number outstanding I/O requests) * The locality of last queued I/O vs the new I/O request. Within the locality calculation additional knowledge about the underlying vdev is considered such as; is the device backing the vdev a rotating media device. This results in performance increases across the board as well as significant increases for predominantly streaming loads and for configurations which don't have evenly performing devices. The following are results from a setup with 3 Way Mirror with 2 x HD's and 1 x SSD from a basic test running multiple parrallel dd's. With pre-fetch disabled (vfs.zfs.prefetch_disable=1): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s With pre-fetch enabled (vfs.zfs.prefetch_disable=0): == Stripe Balanced (default) == Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s == Load Balanced (zfslinux) == Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s == Load Balanced (locality freebsd) == Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s In addition to the performance changes the code was also restructured, with the help of Justin Gibbs, to provide a more logical flow which also ensures vdevs loads are only calculated from the set of valid candidates. The following additional sysctls where added to allow the administrator to tune the behaviour of the load algorithm: * vfs.zfs.vdev.mirror.rotating_inc * vfs.zfs.vdev.mirror.rotating_seek_inc * vfs.zfs.vdev.mirror.rotating_seek_offset * vfs.zfs.vdev.mirror.non_rotating_inc * vfs.zfs.vdev.mirror.non_rotating_seek_inc These changes where based on work started by the zfsonlinux developers: https://github.com/zfsonlinux/zfs/pull/1487 Reviewed by: gibbs, mav, will MFC after: 2 weeks Sponsored by: Multiplay
Remove Giant-locked drivers support (DISKFLAG_NEEDSGIANT flag) from disk(9). Since at least FreeBSD 7 we had only four of them in the base tree, and in head branch, thanks to jhb@, we have no any for more then a year.
Merge GEOM direct dispatch changes from the projects/camlock branch. When safety requirements are met, it allows to avoid passing I/O requests to GEOM g_up/g_down thread, executing them directly in the caller context. That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid several context switches per I/O. The defined now safety requirements are: - caller should not hold any locks and should be reenterable; - callee should not depend on GEOM dual-threaded concurency semantics; - on the way down, if request is unmapped while callee doesn't support it, the context should be sleepable; - kernel thread stack usage should be below 50%. To keep compatibility with GEOM classes not meeting above requirements new provider and consumer flags added: - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request); - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done); - G_PF_DIRECT_SEND -- provider code meets caller requirements (done); - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request). Capable GEOM class can set them, allowing direct dispatch in cases where it is safe. If any of requirements are not met, request is queued to g_up or g_down thread same as before. Such GEOM classes were reviewed and updated to support direct dispatch: CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE, VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL, MAP, FLASHMAP, etc). To declare direct completion capability disk(9) KPI got new flag equivalent to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk drivers got it set now thanks to earlier CAM locking work. This change more then twice increases peak block storage performance on systems with manu CPUs, together with earlier CAM locking changes reaching more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to 256 user-level threads). Sponsored by: iXsystems, Inc. MFC after: 2 months
MFprojects/camlock r254907: Move g_io_deliver() out of the lock, as required for direct dispatch. Move g_destroy_bio() out too to reduce lock scope even more.
MFprojects/camlock r254905: Introduce new function devstat_end_transaction_bio_bt(), adding new argument to specify present time. Use this function to move binuptime() out of lock, substantially reducing lock congestion when slow timecounter is used.
Add new attribute lunname to report only textual LUN-specific device IDs. While lunid attribute prefers to report numeric ones, having both may be useful in some situations.
Bump disk(9) ABI version to signify the addition of d_delmaxsize by r249940. Ensure that d_delmaxsize is always set, removing init to 0 which could cause future issues if use cases change. Allow kern.cam.da.X.delete_max (which maps to d_delmaxsize) to be increased up to the calculated max after being reduced. MFC after: 1 day X-MFC-With: r249940
Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. SPC-4 specification states that serial number may be property of device, but not a specific logical unit. People reported about FC storages using serial number in that way, making it unusable for purposes of LUN multipath detection. SPC-4 states that designators associated with logical unit from the VPD page 83h "Device Identification" should be used for that purpose. Report first of them in the new attribute in such preference order: NAA, EUI-64, T10 and SCSI name string. While there, make GEOM DISK properly report GEOM::ident in XML output also using d_getattr() method, if available. This fixes serial numbers reporting for SCSI disks in `geom disk list` output and confxml. Discussed with: gibbs, ken Sponsored by: iXsystems, Inc. MFC after: 2 weeks
Don't update provider properties and don't set DISKFLAG_OPEN if d_open() disk method call returned error. GEOM considers devices in such case as still closed, and won't call symmetric d_close() for them.
Teach GEOM and CAM about the difference between the max "size" of r/w and delete
requests.
sys/geom/geom_disk.h:
- Added d_delmaxsize which represents the maximum size of individual
device delete requests in bytes. This can be used by devices to
inform geom of their size limitations regarding delete operations
which are generally different from the read / write limits as data
is not usually transferred from the host to physical device.
sys/geom/geom_disk.c:
- Use new d_delmaxsize to calculate the size of chunks passed through to
the underlying strategy during deletes instead of using read / write
optimised values. This defaults to d_maxsize if unset (0).
- Moved d_maxsize default up so it can be used to default d_delmaxsize
sys/cam/ata/ata_da.c:
- Added d_delmaxsize calculations for TRIM and CFA
sys/cam/scsi/scsi_da.c:
- Added re-calculation of d_delmaxsize whenever delete_method is set.
- Added kern.cam.da.X.delete_max sysctl which allows the max size for
delete requests to be limited. This is useful in preventing timeouts
on devices who's delete methods are slow. It should be noted that
this limit is reset then the device delete method is changed and
that it can only be lowered not increased from the device max.
Reviewed by: mav
Approved by: pjd (mentor)
Introduce a symbol for the GEOM class name instead of using the ad-hoc string constant.
Following r241022, replace iteration over the provider list on media events by taking first one and asserting that there is no others. MFC after: 1 week
In GEOM DISK: - Replace single done mutex with per-disk ones. On system with several disks on several HBAs that removes small, but measurable lock congestion. - Modify disk destruction process to not destroy the mutex prematurely. - Remove some extra pointer derefences.
A flag for the geom disk driver to indicate that it accepts the unmapped i/o requests. Sponsored by: The FreeBSD Foundation Tested by: pho
Fix locking problem in disk_resize(); previously it would run without topology lock, resulting in assertion when running with DIAGNOSTIC. Reviewed by: mav (earlier version)
Remove the topology lock from disk_gone(), it might be called with regular mutexes held and the topology lock is an sx lock. The topology lock was there to protect traversing through the list of providers of disk's geom, but it seems that disk's geom has always exactly one provider. Change the code to call g_wither_provider() for this one provider, which is safe to do without holding the topology lock and assert that there is indeed only one provider. Discussed with: ken MFC after: 1 week
Use the topology lock to protect list of providers while withering them. It is possible that provider is destroyed while we are iterating over the list. Reported by: Brian Parkison <parkison@panzura.com> Discussed with: phk MFC after: 1 week
g_disk_flushcache definitely should not be traced under G_T_TOPOLOGY ... use G_T_BIO instead MFC after: 1 week
Remove unneeded G_PF_CANDELETE flag. This flag is only used by GEOM so it can be propagated to the character device's SI_CANDELETE. Unfortunately, SI_CANDELETE seems to do nothing.
Implement media change notification for DA and CD removable media devices. It includes three parts: 1) Modifications to CAM to detect media media changes and report them to disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes Asynchronous Notification mechanism to receive events from hardware. Active polling with TEST UNIT READY commands with 3 seconds period is used for incapable hardware. After that both CD and DA drivers work the same way, detecting two conditions: "NOT READY: Medium not present" after medium was detected previously, and "UNIT ATTENTION: Not ready to ready change, medium may have changed". First one reported to disk(9) as media removal, second as media insert/change. To reliably receive second event new AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by generic error handling code in cam_periph_error(). 2) Modifications to GEOM core to handle media remove and change events. Media removal handled by spoiling all consumers attached to the provider. Media change event also schedules provider retaste after spoiling to probe new media. New flag G_CF_ORPHAN was added to consumers to reflect that consumer is in process of destruction. It allows retaste to create new geom instance of the same class, while previous one is still dying. 3) Modifications to some GEOM classes: DEV -- to report media change events to devd; VFS -- to handle spoiling same as orphan to prevent accessing replaced media. PART class already handles spoiling alike to orphan. Reviewed by: silence on geom@ and scsi@ Tested by: avg Sponsored by: iXsystems, Inc. / PC-BSD MFC after: 2 months
Add disk_resize(), to make it possible for the disk drivers such as da(4) to notify GEOM about LUN size change. Reviewed by: mav (earlier version) Sponsored by: FreeBSD Foundation
In g_disk_providergone(), don't continue if the softc is NULL. This may be the case if we've already gone through g_disk_destroy(). Reported by: Michael Butler <imb@protected-networks.net> MFC after: 3 days
Fix a bug which causes a panic in daopen(). The panic is caused by a da(4) instance going away while GEOM is still probing it. In this case, the GEOM disk class instance has been created by disk_create(), and the taste of the disk is queued in the GEOM event queue. While that event is queued, the da(4) instance goes away. When the open call comes into the da(4) driver, it dereferences the freed (but non-NULL) peripheral pointer provided by GEOM, which results in a panic. The solution is to add a callback to the GEOM disk code that is called when all of its resources are cleaned up. This is implemented inside GEOM by adding an optional callback that is called when all consumers have detached from a provider, and the provider is about to be deleted. scsi_cd.c, scsi_da.c: In the register routine for the cd(4) and da(4) routines, acquire a reference to the CAM peripheral instance just before we call disk_create(). Use the new GEOM disk d_gone() callback to register a callback (dadiskgonecb()/cddiskgonecb()) that decrements the peripheral reference count once GEOM has finished cleaning up its resources. In the cd(4) driver, clean up open and close behavior slightly. GEOM makes sure we only get one open() and one close call, so there is no need to set an open flag and decrement the reference count if we are not the first open. In the cd(4) driver, use cam_periph_release_locked() in a couple of error scenarios to avoid extra mutex calls. geom.h: Add a new, optional, providergone callback that is called when a provider is about to be deleted. geom_disk.h: Add a new d_gone() callback to the GEOM disk interface. Bump the DISK_VERSION to version 2. This probably should have been done after a couple of previous changes, especially the addition of the d_getattr() callback. geom_disk.c: Add a providergone callback for the disk class, g_disk_providergone(), that calls the user's d_gone() callback if it exists. Bump the DISK_VERSION to 2. geom_subr.c: In g_destroy_provider(), call the providergone callback if it has been provided. In g_new_geomf(), propagate the class's providergone callback to the new geom instance. blkfront.c: Callers of disk_create() are supposed to pass in DISK_VERSION, not an explicit disk API version number. Update the blkfront driver to do that. disk.9: Update the disk(9) man page to include information on the new d_gone() callback, as well as the previously added d_getattr() callback, d_descr field, and HBA PCI ID fields. MFC after: 5 days
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. The SYSCTL_NODE macro defines a list that stores all child-elements of that node. If there's no SYSCTL_DECL macro anywhere else, there's no reason why it shouldn't be static.
Allow upper layers to discover than BIO_DELETE and/or BIO_FLUSH is not supported by returning EOPNOTSUPP instead of 0 or ENODEV. MFC after: 3 days
Improve style a bit. MFC after: 3 days
Simplify disk_alloc(). MFC after: 3 days
Include sys/sbuf.h directly. Reviewed by: pjd
Plumb device physical path reporting from CAM devices, through GEOM and DEVFS, and make it accessible via the diskinfo utility. Extend GEOM's generic attribute query mechanism into generic disk consumers. sys/geom/geom_disk.c: sys/geom/geom_disk.h: sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Allow disk providers to implement a new method which can override the default BIO_GETATTR response, d_getattr(struct bio *). This function returns -1 if not handled, otherwise it returns 0 or an errno to be passed to g_io_deliver(). sys/cam/scsi/scsi_da.c: sys/cam/ata/ata_da.c: - Don't copy the serial number to dp->d_ident anymore, as the CAM XPT is now responsible for returning this information via d_getattr()->(a)dagetattr()->xpt_getatr(). sys/geom/geom_dev.c: - Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM attribute "GEOM::physpath", if possible. If the attribute request returns a zero-length string, ENOENT is returned. usr.sbin/diskinfo/diskinfo.c: - If the DIOCGPHYSPATH ioctl is successful, report physical path data when diskinfo is executed with the '-v' option. Submitted by: will Reviewed by: gibbs Sponsored by: Spectra Logic Corporation Add generic attribute change notification support to GEOM. sys/sys/geom/geom.h: Add a new attrchanged method field to both g_class and g_geom. sys/sys/geom/geom.h: sys/geom/geom_event.c: - Provide the g_attr_changed() function that providers can use to advertise attribute changes. - Perform delivery of attribute change notifications from a thread context via the standard GEOM event mechanism. sys/geom/geom_subr.c: Inherit the attrchanged method from class to geom (class instance). sys/geom/geom_disk.c: Provide disk_attr_changed() to provide g_attr_changed() access to consumers of the disk API. sys/cam/scsi/scsi_pass.c: sys/cam/scsi/scsi_da.c: sys/geom/geom_dev.c: sys/geom/geom_disk.c: Use attribute changed events to track updates to physical path information. sys/cam/scsi/scsi_da.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, and the updated buffer type references our physical path attribute, emit a GEOM attribute changed event via the disk_attr_changed() API. sys/cam/scsi/scsi_pass.c: Add AC_ADVINFO_CHANGED to the registered asynchronous CAM events for this driver. When this event occurs, update the physical patch devfs alias for this pass instance. Submitted by: gibbs Sponsored by: Spectra Logic Corporation
Update disk's stripesize and stripeoffset parameters on provider open. They are media-dependent and may change in run-time, same as sectorsize and/or mediasize. SCSI devices return physical sector size and offset via READ CAPACITY(16) command and so can not report it until media inserted or at least until probe sequence completed. UNMAP support is also reported there.
MFgraid/head r218212, r218257: Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower GEOM about state of it's providers from the point of upper layers. Make geom_disk use led(4) subsystem to illuminate states in such fashion: FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink), ACTIVE - "0" (off). LED name should be set for each disk via kern.geom.disk.%s.led sysctl. Later disk API could be extended to allow disk driver to report this info in custom way via it's own facilities.
MFgraid/head r217827: Change BIO_GETATTR("GEOM::kerneldump") API to make set_dumper() called by consumer (geom_dev) instead of provider (geom_disk). This allows any geom insert it's code into the dump call chain, implementing more sophisticated functionality then just disk partitioning.
Add the disk ident and a human-meaningful description (here, the disk model string) to the geom_disk config XML so that they are easily accessible from userland. MFC after: 1 week
Remove the CTLFLAG_NOLOCK as it seems to be both unused and unfunctional. Wiring the user buffer has only been done explicitly since r101422. Mark the kern.disks sysctl as MPSAFE since it is and it seems to have been mis-using the NOLOCK flag. Partially break the KPI (but not the KBI) for the sysctl_req 'lock' field since this member should be private and the "REQ_LOCKED" state seems meaningless now.
Add reporting of GEOM::candelete BIO_GETATTR for md(4) and geom_disk(4). Non-zero value of attribute means that device supports BIO_DELETE. Suggested and reviewed by: pjd Tested by: pho MFC after: 1 week
Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to GEOM. This information needed for proper soft-RAID's on-disk metadata reading and writing.
Simplify g_disk_ident_adjust() function and allow any printable character in serial number. Discussed with: trasz Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
Revert r190676,190677 The geom and CAM changes for root_hold are the wrong solution for USB design quirks. Requested by: scottl
Add interleaving root hold tokens from the CAM probe to disk_create and geom provider tasting. This is needed for disk attachments that happen after threads are running in the boot process. Tested by: rnoland
Revert r184136. Instead, push the check for crashdumpmap overflow into the MD i386 and amd64 dump code. Requested by: jhb Retested by: pho MFC after: 3 days (+ 176304 + 184136)
Do not overflow crashdumpmap. Reported and tested by: pho Reviewed by: jhb MFC after: 1 week
Add sbuf_new_auto as a shortcut for the very common case of creating a completely dynamic sbuf. Obtained from: Varnish MFC after: 2 weeks
Teach the dump and minidump code to respect the maxioszie attribute of the disk; the hard-coded assumption of 64K doesn't work in all cases.
Allow to use ':' in d_ident, which is quite handy character.
Because there are many strange hardware out there, allow to use only [a-zA-Z0-9-_@#%.] characters in d_ident field.
- Extend disk structure to allow to store disk's serial number, which can be retrieved via GEOM::ident attribute. - Bump disk(9) ABI version. OK'ed by: phk
Reduce the noise when plugging in (USB) mass storage devices, like a 4 port flash card reader. Also remove an 'Opened da0 -> <random number>' which is not needed on a daily basis (available through bootverbose). Reviewed by: phk, ken MFC after: 1 week
Add a new disk flag - DISKFLAG_CANFLUSHCACHE, which indicates that the disk can handle BIO_FLUSH requests. Sponsored by: home.pl
Add g_wither_provider() to abstract the details of destroying a particular provider. Use this function where g_orphan_provider() is being called so that the flags are updated correctly and g_orphan_provider() is called only when allowed.
Fix a bug that caused some /dev entries to continue to exist after the underlying drive had been hot-unplugged from the system. Here is a specific example. Filesystem code had opened /dev/da1s1e. Subsequently, the drive was hot-unplugged. This (correctly) caused all of the associated /dev/da1* entries to be deleted. When the filesystem later realized that the drive was gone it closed the device, reducing the write-access counts to 0 on the geom providers for da1s1e, da1s1, and da1. This caused geom to re-taste the providers, resulting in the devices being created again. When the drive was hot-plugged back in, it resulted in duplicate /dev entries for da1s1e, da1s1, and da1. This fix adds a new disk_gone() function which is called by CAM when a drive goes away. It orphans all of the providers associated with the drive, setting an error condition of ENXIO in each one. In addition, we prevent a re-taste on last close for writing if an error condition has been set in the provider. Sponsored by: Isilon Systems Reviewed by: phk MFC after: 1 week
Move some devstat collection to below where large IO operations are chopped up. This make iostat report operations passed down to the device driver instead of operations passed down to GEOM disk. The transfer size limit imposed by the device driver is no longer hidden, improving the correlation between iostat output and device driver workload.
After rejecting the bio request early, return instead of panicing. Found by: Coverity (ID#450)
Make various random things static
When dumping to a unpartitioned disk, make sure to chop the length of the dump area accordingly. Run into by: scottl
CAM will sometimes remove a disk again even before it finished being initialized. We already cancel the pending events but we need to not dereference the geom pointer which never got set different from NULL.
Pass the file->flags down to geom ioctl handlers. Reject certain ioctls if write permission is not indicated. Bump geom API version. Reported by: Ruben de Groot <mail25@bzerk.org>
Tag all geom classes in the tree with a version number.
Use default method initialization on geoms.
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.27 |